TowCheckNumbers before miles

CARGO SECUREMENT PLANNER

Cargo Securement WLL Planner

Verify Working Load Limit (WLL) capacities for ratchet straps, chains, and anchors to secure cargo safety margins.

1. Cargo Specifications

2. Tie-Down Assemblies Inventory

Assembly #1
Contribution1,000 lb100% WLL credit
Assembly #2
Contribution1,000 lb100% WLL credit

Securement Capacity Evaluation

Aggregate WLL capacity2,000 lbSum of all active assembly contributions.
Required WLL (50% cargo)0 lbMinimum safety threshold for general hauling.
Securement VerificationVERIFIED CAPACITYUnder limit by 2,000 lb
General Consumer Scope: Anchoring and straps must secure the vehicle against all dynamic movements. Inspect anchor welds and ratchet gears before hauling.

Shopping-link note: These are standard comparison links. TowCheck does not currently earn a commission from them. Treat each item as a category to compare, then verify its marked WLL, dimensions, instructions and compatibility with the exact setup.

Equipment to compare & verify

Heavy-Duty Ratchet Straps (4-Pack)

2-Inch Width, 3,333 lb WLL (10,000 lb breaking strength), Double-Line Stitching.

  • Check: Are your trailer anchor rings rated for at least 3,300 lb?
  • Check: Are the straps marked with a legible WLL rating tag?
View on Amazon

Motorcycle / UTV Soft Loops (6-Pack)

1.5-Inch Width, 1,200 lb WLL, protects handlebars and fairings from hook scratches.

  • Check: Does your machine have a solid frame point to wrap the loops?
  • Check: Do the soft loops avoid rubbing against brake lines or wiring?
View on Amazon
LAST UPDATEDJuly 20, 2026
REVIEW STATUSSource-reviewed by TowCheck
SOURCES CHECKEDJuly 20, 2026

Methodology: Calculations are derived directly from the Federal Motor Carrier Safety Administration (FMCSA) Cargo Securement Rules. Read calculation methodology or report a correction.

HOW TO USE THIS TOOL

Cargo WLL Planner: what the result means

Use before hauling cargo on a flatbed, trailer, or truck bed to plan securement straps and check ratings.

Steps

  1. Enter the cargo wet/dry weight and length.
  2. List individual tie-down assemblies with strap and anchor ratings.
  3. Select direct or indirect attachment method for each tie-down.
  4. Check aggregate WLL against the required 50% threshold.

Formula

Aggregate WLL = Sum of WLL contributions (Direct: 0.5 × assembly WLL; Indirect: 1.0 × assembly WLL), where assembly WLL is the minimum of the strap and anchor ratings.

Important limits

  • This planning tool is educational and does not constitute a legal or safety certification.
  • Ensure all straps, chains, and anchors are inspectable and free of damage.

Primary references

TowCheck uses these references for terminology and planning context. Your exact vehicle, trailer, tire and equipment documentation always controls.

review the full calculation methodology or report a correction.